OFFICE: 01483­ 457295

MOBILE: 07854­ 811425

24HR CALL: 0782­ 5616901

Contact FJ Maintenance Guildford

Resin Bound Surfaces & Resin Bonded

FJ Maintenance specialise in Resin Bound/Resin Bonded Surfaces

Where our resin surfaces can be used:

  • Access ramps
  • Heritage sites
  • Suds compliant schemes
  • Driveways
  • Car parks
  • Parks
  • Tree pits
  • Pedestrian areas
  • Landscape schemes
  • Regeneration projects
  • Wall coverings
  • Playgrounds
  • Swimming pool
    surrounds
  • Patios
  • Corporate logos
  • Hotel lobbies
  • Retail outlets
  • Bathrooms
  • Office areas
  • Churches
  • Reception areas
  • Leisure centres
  • Water features
  • Conservatories
  • Kitchens
  • Hallways
  • Footpaths
  • Courtyards
  • Private roads
  • Anti-slip driveways
  • Showrooms
  • Access roads
  • Internal and external
  • Wet rooms

Fully trained installers

We are fully trained by the Resin Bound Surfaces Group Training Ltd. The course was designed to enable us to obtain the core skills required to supply, install and market these systems.
We learnt learn how to plan and carry out successful installations and how to resolve the most common issues that arise.

The products we install

An extensive range of natural aggregates & re-cycled materials can be used in these systems including : Coloured Glass, Italian Marble, Coloured Quartz etc. The Colour Quartz is available in any of the colours in the RAL Colour Chart. It can also be blended to create bespoke colours.

Give your old drive a fresh new look with a 25 year guarantee*

Resin Bound systems

Resin bound systems are installed by coating the selected aggregate in resin, then trowel applying the mix to the substrate. This creates a layer that ranges from 15-18mm in thickness. A choice of natural aggregates, from bold red granites to delicate cream limestones can be used within this system. The aggregates are available in sizes up to 10mm in diameter.

Alternative materials such as recycled marble or glass can also be used to enhance the surface. BoundTex resin bound gravel is water permeable and therefore can be used as part of a SUDS compliant installation.

Resin Bonded systems

Resin bonded systems are installed by applying a thin layer of resin to a suitably prepared substrate and then dressing the wet film with a selected aggregate. Finally, the surface is swept removing any excess aggregate leaving a hard wearing,

textured non-slip finish with very little loose gravel. A resin bonded surface has the appearance of a loose gravel system without the associated problems such as weed growth and stone migration which is kept to a minimum. Recommended aggregate sizes to achieve the best finish is below 4mm.

01483 457295 Call us on 01483 457295 for free no obligation quote

How do we lay your resin bound surface?

*25 year guarantee subject to written terms and conditions, please ask one of our staff for full details.